Water damage is difficult for home and business owners to avoid because damage can occur in different ways. Mother Nature can destroy her home or business in heavy rain or flooding. Sometimes your property has internal issues, such as leaks or broken pipes, leading to widespread water damage.
Regardless of the source, it is essential to correct water damage right away to avoid further problems. The longer the water damage remains unresolved, the worse the damage should be. Many common building materials are porous, so they will absorb and continue to absorb excess water and moisture. Additionally, mold growth in response to water damage can occur within 24 hours of the initial damage. Knowing this, it is in everyone’s interest that water damage be repaired immediately.
However, restoration and remediation of water damage can be costly. Nevertheless, you can minimize the cost of repairing water damage by doing a little work yourself in some cases. Learn more about when a water damage repair on your own is helpful and how to use affordable DIY methods to repair water damage.
When does it make sense to repair water damage yourself?
The amount of damage
An essential factor in the self-restoration of water damage is the extent of the water damage. If the damage is minimal and there is little water in your house or building, you can probably repair the damage yourself with the right equipment. Otherwise, you should not repair severe water damage and excessive amounts of water yourself. The same applies to properties that significant floods or other natural disasters have damaged. Your property has likely suffered considerable damage, which is the best handover to the professionals.
The water source
In natural disasters, damaged water can become contaminated with sewage, making it unsafe for you. This water is called black water because of the bacteria and dangerous organisms it contains. Even so, you don’t want to contact professionals because you are exposing yourself to health problems. If you already have a water-damaged house or building, you don’t need to worry about your health. So once again, leave the maintenance to the water damage professionals.
If the water source is clean water, you can safely purify it yourself. Gray water can be easily contaminated, and you can filter it yourself, but only if you have the necessary safety equipment.
How to do a DIY water damage repair?
Follow these steps to guide you through the recovery process once you decide that you can and are equipped to repair water damage yourself.
Prioritize your safety
Before starting any work, you must ensure your safety and the safety of others. Make sure you are well dressed and have the necessary protective equipment. Even if you think the water is clean, it is always best to play it safe and prepare for the worst. It is best if you also made sure the power is off.
Find the source
The key to preventing further water damage is addressing the source of the water. Otherwise, the fountain may end up doing more damage. With that said, you need to address the root cause first before moving on to the more significant water damage issue.
Sometimes, the source is easy to identify, such as a storm or a noticeable leak. The source is hard to find in other cases, so work needs to be done to check out where the water is coming from.
If you notice mold growth, this can help indicate where the damage is coming from. However, there are health problems with mold growth. For this reason, it is a good idea to seek help from a mold removal professional. The same is true if you cannot locate the water source yourself.
Remove excess water and moisture.
You must remove standing water from your property to prevent it from remaining and causing damage. You can remove smaller amounts of water with a wet vacuum. A water pump may be required for larger quantities.
If your basement is affected by water, you need to be careful and remove some of the water. In such a case, it is recommended to remove a third of the water every day. Removing water reduces internal pressure. Loss of pressure can cause walls to collapse and floors to collapse.
Clean and disinfect your property.
For everyone’s safety, clean and disinfect everything that comes into contact with water and everything that has come into contact with water. Anything that is badly damaged should be discarded and replaced.
What to do if DIY water damage restoration is out of the question?
Sometimes water damage can hardly be repaired yourself and requires the expertise of a specialist. Sometimes people are unwilling or unable to repair water damage on their own. Whatever the reason, if DIY methods don’t work for you, hire a professional water damage restoration service to work on your home or business.
It is always recommended to hire a water damage repair and repair professional as they have the perfect knowledge and equipment to get the job done safely, effectively, and efficiently. So if you can afford professional help, take advantage of it. Even if the cost of water damage is higher, it is better to spend the money to do the job correctly and avoid additional damage that can cost even more. Also, by seeking professional help, you will not expose yourself to any health problems resulting from the damage.